2024 Audi RS 3 with Full Body PPF

Full-Body Paint Protection Film

I want this look and protection

Paint Protection Film and Ceramic Coating

2024 Audi RS 3 with Full Body PPF

Full-Body Paint Protection Film

I want this look and protection for my vehicle

Audi RS 3 Paint Protection Film Garland TX 75041

We recently had the privilege of working on this 2024 Audi RS 3 2.5T quattro, focusing on enhancing its appearance and protecting it against the daily wear of commutes on Dallas-Fort Worth highways. The owner opted for a gloss paint protection film for its robust protection and high-gloss look.

Prior to installation, we conducted a thorough inspection of this RS 3 2.5T quattro's paint. This essential step helps us identify any repainted panels, allowing us to implement appropriate techniques during film installation if needed. Our examination confirmed the Audi's paint was indeed factory-original.

Hint: A clean title or "no accidents reported" classification in a vehicle history report such as CARFAX does not guarantee that the vehicle hasn't undergone a cosmetic or structural repair like a repaint job. Accidents and repairs are only reported to vehicle history services if they are filed with insurance companies, police departments, or other reporting agencies, so a clean history report does not guarantee a factory-original paint.

We installed paint protection film on the entire body, employing techniques that ensure a seamless, factory-like matte finish. We then applied CARPRO CQUARTZ Skin ceramic coating over the film, enhancing its dirt repellence, slickness, and UV resistance. Each step of the film installation process is detailed below, showcasing the care and expertise we bring to every project:

Discover how we wrap edges for an invisible installation

Our edge-wrapping technique ensures seamless and nearly invisible paint protection. By carefully wrapping the film around vehicle panel edges, we achieve maximum coverage and maintain the car's sleek look.

Hood

Fenders

Front Bumper

Doors

Quarter Panels

Roof

Trunk

Rear Bumper

Others

By concealing the PPF's edges beneath the hood, we provide maximum protection while maintaining a seamless appearance.
Hood
Tucking the film's edges under the hood shields vulnerable areas and creates a seamless look.
Hood
We tightly trim the PPF at the corners to minimize the exposed edges of the film, where dirt is more likely to accumulate.
Hood
For a flawless finish and complete edge coverage, we meticulously tuck the PPF under the hood.
Hood
We carefully trim the PPF at the corners to minimize dirt accumulation.
Hood
Our goal in PPF installations is to make the protection film virtually invisible.
Hood
Our expertise lies in applying PPF with a virtually invisible result, preserving the original appearance.
Hood
With meticulous attention to detail, we apply PPF in a way that renders it virtually indiscernible from the surface.
Hood
We meticulously trim the PPF at the corners to minimize exposed edges, reducing the likelihood of dirt accumulation.
Hood

We ensure that the paint protection film on the fenders is applied so precisely that it becomes almost undetectable.
Fenders
We take great care in wrapping the PPF around the vertical edge of the fender, ensuring the transition where it meets the door is completely concealed.
Fenders
While the gap between the fender and the headlight was quite tight, we maneuvered the paint protection film's edge into the cramped space for a seamless finish.
Fenders
To prevent dirt buildup on the PPF, we take extra care to tightly trim the film around the fenders' sharp corners.
Fenders
By tightly trimming the PPF around the fenders' sharp corners, we limit the exposed edges that can collect dirt and maintain a clean, seamless look.
Fenders
For cars with chromatic colors, it's especially crucial to tuck in the paint protection film in areas prone to dirt accumulation. This ensures that any dirt on the film's edges remains less noticeable.
Fenders

Precut kits are ideal for the complex shapes of front bumpers – especially on performance and internal combustion engine cars – offering a more efficient method of installation.
Front Bumper
We rely on precut kits for front bumpers to achieve uniform standards at a reasonable cost, allowing us to offer competitive prices to our customers while delivering results well above industry standards.
Front Bumper

Removing the door handles allows better dirt control while ensuring a seamless installation.
Doors
For a perfectly invisible installation, we remove the door belt molding to ensure the paint protection film edges are hidden.
Doors
After reinstalling the molding, it appears as if the PPF was never there.
Doors
We take great care in wrapping the PPF around the vertical edges of the doors, ensuring the edges remain invisible for a seamless look.
Doors
Wrapping door edges with paint protection film is key for both an invisible look and impact protection.
Doors
We installed PPF on the front doors of this Audi without removing the side view mirrors, tucking the film neatly under the mirror sills. This method is used when the vehicle owner prefers that we do not remove the mirrors.
Doors

We tucked the PPF underneath the molding without removing it to achieve a seamless and clean installation.
Quarter Panel
The gap between the molding and the quarter panel was wide enough to accommodate the PPF.
Quarter Panel
To prevent dirt buildup on the PPF, we take extra care to tightly trim the film around the quarter panels' sharp corners.
Quarter Panel
We meticulously trim the PPF around sharp corners and body lines, minimizing exposed edges.
Quarter Panel
We conceal the edges of the PPF to achieve maximum protection and a seamless finish.
Quarter Panel
The very tight gap between the quarter panel and rear bumper prevented us from tucking the film properly.
Quarter Panel
We wrapped the edges of the film into the gap where the quarter panel meets the rear window for a seamless installation.
Quarter Panel
We conceal the edges of the PPF to achieve maximum protection and a seamless finish.
Quarter Panel
We meticulously trim the film to ensure it perfectly follows every contour.
Quarter Panel

Roof
Roof
Roof

Trunk
Trunk
Trunk
Trunk
Trunk
Trunk
Trunk
Trunk

Rear Bumper
Rear Bumper

Side View Mirror

If you are interested in purchasing this Audi RS 3 2.5T quattro, which is equipped with a full-body paint protection film wrap, you can sign up for notifications through the link below. This will allow you to receive updates about when this vehicle becomes available, including details on pricing.

Here are 5 reasons why signing up for notifications regarding the availability of this Audi RS 3 2.5T quattro makes perfect sense:

Factory-original paint

Before PPF installation, we meticulously examined the paint of this RS 3 2.5T quattro and confirmed that it is factory-original, with none of the body panels having been repainted. If you’re in the market for a RS 3 with OEM paint, this might be the right one for you.

Built-in paint protection

This RS 3 is equipped with a full-body paint protection film, setting it apart as a more valuable option in the market. A very high percentage of this Audi’s body is within the high-impact zone, making paint protection film a valuable addition to this vehicle.

Impeccably maintained

Commitment to keeping a car’s aesthetics in excellent condition usually translates into adherence to timely services, including oil changes. Investing in full-body PPF indicates a desire to protect that investment, suggesting that this RS 3 with such protection is likely better maintained and in superior condition than others.

More accurate paint history

Before PPF installation, we meticulously examined this RS 3’s paintwork to ensure it is free from any repairable imperfections or contaminants. This process not only allows us to verify the paint’s authenticity at present but also enables us to identify any instances of repainting or rewrapping that may occur in the future.

Aesthetic expectations

If you own a Audi RS 3, you naturally expect perfection and exceptional visual appeal. Paint protection film is crucial here. It keeps your car’s exterior immaculate and shields from scratches and daily wear. The self-healing feature of the PPF on this RS 3 ensures that it will consistently meet your high aesthetic standards and maintain its classy look for years.

Vehicle Details

Year

2024

Make

Audi

Model

RS 3 2.5T quattro

Sales Status

Status

Not available yet

Availability Date

Now known yet

Auction Platform

Bring a Trailer

Activity Log

21/05/2024

642 miles

Paint protection film installation

Ceramic coating installation

Rock chip repair (Touch up)

Notes and Comments

20/05/2024

Gunes I.

Although this Audi RS 3 had only a few hundred miles when it arrived at our shop, it already had a rock chip on the hood, which was repaired before the PPF installation.

We wrapped the trims on this Audi RS 3, including the grille, rocker panels, side mirrors, and spoiler, with gloss black PPF.