in Paint Correction
RestorFX® Compact
Coupes, Compacts & Convertibles
RestorFX® is the most advanced paint restoration and correction technology on the market. It creates a new layer of clear-coat on the original finish and permanently repairs scratches and clear-coat imperfections.
Categories
What Is RestorFX®?
RestorFX® is the most advanced paint restoration and correction technology on the market today. It is not a polish, not a ceramic coating. It is a two-part professionally-applied automotive clear-coat that chemically adheres to the original paint, permanently repairs the scratches, swirls marks, fading, and restores a high-quality shine.
How RestorFX® works?
RestorFX® is a professional clear-coat that has extensive capability to restore and correct automotive paints. Unlike traditional paint correction, RestorFX® does not reduce the overall thickness of the paint, instead, it increases the thickness by creating a new exterior layer. Before application, every square inch of the paint is lightly wet-sanded to prep the surface and ensure permanent bonding. After application, RestorFX® self-levels and creates a new tough layer of protection.
How long does the coating last?
RestorFX® is a permanent clear-coat. It stays on the paint as long as the original paint stays on the car. It does not wear off, lose performance, disappear, peel, or delaminate.
What are the steps?
Full paint inspection
Flood wash
Lettering and trim removal (when needed)
Wet sanding - 2000 grit sand paper (only at required spots)
Wet sanding - 3000 grit foam disc (only at required areas)
Wet sanding - 5000 grit foam disc (all painted surfaces)
Clay bar treatment
Steam washing, overspray cleaning (when needed)
Flood wash and detail, crack, crevice and panel edge cleaning
Blow drying
Trim masking
Alcohol prepping
RestorFX® application
Paint touch-up
Final quality check and paint sealant application
What are the benefits?
Repairs all clear-coat swirls and scratches
Repairs fading, weathering and oxidation
Creates an extra layer of protection against UV rays
Fills all clear-coat imperfections, smooths-out the paint surface, and dramatically enhances the gloss
Removes all surface contamination and deposits, including brake dust, road grime, overspray
Increases the overall thickness of the paint
Increase the market value to your vehicle
How RestorFX® Compares to Conventional Paint Correction
RestorFX®
Paint Correction & RestorationPaint Correction
Multi-Step Process8 Hours
Light Scratches
Repairing of superficial scratches and swirl marks70-90%
Semi-Deep Scratches
Repairing of deeper clear-coat scratches50-70%
Deep Scratches
Repairing of scratches that partially go down to the base-coat30-70%
<20%
Scuffs
Repairing of scuffs that partially go down to the base-coat30-70%
<20%
Severe Etching
Repairing of deep hard-water etching50-70%
Superficial Etching
Repairing of superficial hard-water etching70-90%
Contaminants and Deposits
Cleaning of road tar and grime70-90%
Overspray
Cleaning of oversprays70-90%
Tree Sap and Bird Dropping Damage
Repairing of paint etching20-40%
0%
Process Summary
An average process involves; (1) Two-step washing, (2) Three-step wet sanding the entire vehicle, (3) Tar, grime, overspray etc. removal, (4) Taping and masking, (5) Air darting , (6) Prepping before clear coat application, (7) RestorFX® application, (8) Quality control and paint correction, (9) Touching-up of paint chips, (10) Removal and reinstallation of emblems and letterings
An average process involves; (1) Two-step washing, (2) Three-step local wet sanding, (3) Tar, grime, overspray etc. removal, (4) Three-step polishing, (5) Quality control, (6) Touching-up of paint chips